Contact Details
Phone: 00 353 (0)90 6471223       Email: info@firstpolymer.com

Plastic Materials Selection

Course Dates

To be verified
Booking/Enquiry

QQI one to use on website

Cost: €1195  (10% discount for Plastic Ireland/Ibec members) including course manual, lunch and refreshments.

This course is a comprehensive 5 day program which covers a wide spectrum of plastics materials. Plastics are explained in terms of their chemical nature, physical properties, processing requirement and design use application. The course is supported by an extensive set of polymer descriptions, explanative notes, technical and processing data designed to support those selecting, processing and designing with plastics materials.

Day 1 covers the commodity plastic families of Olefins, Styrenics and PVC. Includes the latest reinforced LGF PP grades, Bi-modal PE blends, impact modification, property enhancement, etc.

Day 2 explains the families of engineering plastics, includes polyamides, polyesters, acetals – e.g.  ST high impact grades and the emerging sulphone polymers – in particular PPS and its derivatives.

Day 3 covers thermoset polymers, explains the nature of these materials, mould tool designs, material formats, applications and why these materials are re-emerging and includes the reasons why designers are selecting these materials over thermoplastics and metals.  Fibre formats and reinforcing theory explained.

Day 4 covers high performance plastics, including Ketones, Imides, LCPS, Aromatic Amides and the PTFE family of polymers with their unique processing requirements. In each case the material properties, processing, tool and product design requirements will be explained.

Day 5 – AM will focus upon material additives and property enhancement. Grade selection and application enhancement will be explained, including worked examples and tutorial sessions. PM will include an assignment tutorial session and a 1hr 30min QQI level 5 examination.

Overview: Under the topic of ‘material nature’ the trainer will be going into the chemical structure for each polymer, explaining its morphology and how this influences mechanical, chemical and flow properties of each polymer. The aim is for course attendees to be able to predict certain properties of the polymer they are looking at from the chemical structure and rheological data by the end of the course. The trainer will explain how polymer properties are modified for commercial use applications (enhance properties for given applications), eg. plasticisers, impact modification, reinforcement, ESD, fillers, extenders, anisotropy with high performance polymers, accuracy with cross linked polymers, etc. Importantly, day 5 will tie in the knowledge gained earlier in the course in the form of exercises and an examination. The mini-project after the course is an important learning tool and will effectively use the information gained in a practical context.

With regard to learning about thermoset, rubber and high performance polymers, this part of the course is very important with regard to expanding knowledge gained in the areas of use limitation for commodity and engineering polymers, eg. rubber is used as an impact modifier in many polymers or to create an elastomeric blended material – a knowledge of rubber compound design would be beneficial in selection of the correct modified grade of polymer. PTFE as an additive / copolymer is becoming more popular for given applications, eg, tribological, high temperature resistance, enhancing chemical resistance, etc , an understanding of PTFE materials and how they are used is important as this is an expanding area within polymer compound design, etc.

The aim of this new  programme is to give engineers the knowledge, skill and competence to understand the vast range of polymer materials available and to appropriately choose a cost effective material for a given application, while considering processing characteristics and design considerations/ limitations

First Polymer Training Skillnet, Tel: 00 353-(0)90 6471223, Email: info@firstpolymer.com

Cost: €1195 (10% discount for Plastic Ireland/Ibec members) including course manual, lunch and refreshments.

Who should attend this course:
This course is aimed at Plastic part and mould designers, R&D engineers, or any plastic processing technical staff wishing to update their understanding of plastic materials and material selection.

Venue:
7  Centre  Court, Blyry Business and Commercial Park, Athlone.

Safety Shoes – Required on this course

Name of Awarding Body: Quality and Qualifications Ireland QQI

Title of Programme: Plastic Materials Selection

Award to which it leads: Plastic Materials Selectin

QQI Code: 5N3155

This programme is a QQI component (minor) award, certified at Level 5 on the national framework of qualifications – see www.nfq.ie  and is an elective component of major awards

  • 5M3080 – Plastics Injection Moulding
  • 5M3067 – Plastic Extrusion Blow Moulding
  • 5M3074 – Plastics Extrusion. 

 

 Protection for Enrolled Learners Policy

 

 

Facebook Twitter Email

If you are a jobseeker please click here for courses that are available

Book this Course Booking Conditions Other Courses Back to Home Page